Note: This page may contain affiliate links.

How To Get Kinetic Sand Out Of Carpet

How To Get Kinetic Sand Out Of Carpet (6 Simple Steps)

Has your toddler friend spilled kinetic sand on the carpet? That’s a real mess, but don’t worry. It’s a cakewalk to get Kinetic sand out of the carpet surface. 

  • Start by lifting the big pieces.  
  • Sweep or vacuum the remaining sand.  

However, this must be done immediately after the spill because getting sand particles – out of the carpet fibers will be difficult afterwards.  

Continue reading for a detailed step-by-step guide on how to get Kinetic sand out of your carpet.

❓How To Clean Up Kinetic Sand From Carpet

Ways to Clean Up Kinetic Sand from Carpet

Kinetic sand sticks and easily penetrates the carpet fibers if it comes in contact with liquid. However, the cleaning process below will help remove kinetic sand from your carpet properly. 

🧰Things You Need

  • Floor Cleaning Brush
  • White Vinegar
  • Distilled or Deionized Water
  • Detergent or Dish Soap
  • Clean Rag
  • Vacuum Cleaner 

🚶Steps To Follow

Step 1. Clear Kinetic Sand

Sweeping is the key. Brush off as much sand as possible. Ensure you are swift in cleaning so the sand does not damage the carpet’s fibers. Be careful, as applying too much pressure can spread sand everywhere.

Step 2. Make the Vinegar Solution

Mix 1/3 cup of white vinegar in 2-3 cups of distilled water and use this white vinegar solution to remove stickiness from your carpet.

  • Prepare the simple solution in a spray bottle for easy use. Though you can use normal clean water, distilled water solution is a better and safer option.
Also Read: How To Remove Sticky Residue From Laminate Floors

Step 3. Spray the Solution

Spray the solution

Now, spray the vinegar solution directly on the kinetic sand stains. Keep spraying the mixture until the area is wet enough, but ensure you do not spill too much solution on the carpet.

Note:

Let the solution dry for 2-3 minutes. Next, wipe and clean the kinetic sand stain.

Then, use a tissue or paper towel to wipe and clean the kinetic sand stain from your carpet. Repeat this process until you’re satisfied.

Also Read: Can You Vacuum Orbeez?

Step 4. Apply the Detergent Solution

Vinegar spray may not be enough if spilled kinetic sand isn’t removed on time. Here, the detergent solution can come in handy. 

Mix dishwasher detergent into a cup full of water to make the solution. Once the detergent is dissolved, put this solution into a spray bottle or apply a few drops directly on the carpet.

Spray the solution on the required area and then rub it off using a paper towel. You should repeat this till the solution is finished.

Also Read: How To Clean While You're Pregnant

Step 5. Rinse and Dry

Pour a little water over the carpeted area to increase the effectiveness of the detergent and vinegar solutions. After 2-3 minutes, mop the water with a clean white rag. 

You need to ensure that the carpet gets dried quickly. You can switch on the fan or use silica gels to soak the water. Avoid using a hair dryer or a blower because the heat might damage your carpet.

Step 6. Vacuum the Carpet

Vacuum the Carpet

Then comes the last step: vacuum the rest of your carpet after removing the entire kinetic sand. This is a mandatory step if you are cleaning a matted-down carpet.

Also Read:  How To Remove Tattoo Ink Out Of Carpet

💡Tips

An effective alternative to eliminate kinetic sand and other tough stains from carpets is ‘club soda.’

Follow these simple steps to make use of this method: 

  • Firstly, spray club soda on the area filled with kinetic sand.
  • Wait 2-3 minutes for the soda to settle on the absorbent surface. 
  • Lastly, remove the sand using a simple brush.
Also Read: How To Remove Red Gatorade From Carpet

🎯How To Get Kinetic Sand Out Of Carpet FAQs 

Will kinetic sand ruin my vacuum?

No, vacuuming a good quality kinetic sand won’t ruin your vacuum cleaner. It can be easily vacuumed without pricking your eyes.

How to get kinetic sand out of clothes?

Cleaning kinetic sand from clothes requires a mild detergent. Follow these steps: 

1. Dust off the excess kinetic sand from the clothes into the garbage bin.
2. Put the clothes in the washing tub or bucket.
3. Fill it with warm water. Add one cup of detergent powder per gallon of water.
4. Allow the clothes to sit in the detergent water for 1-2 hours, letting the sand dissolve in it.
5. Scrub off the remaining sand particles with a sponge or brush. 
6. Wash the clothes thoroughly and dry them. 

How to get kinetic sand out of the couch?

To clean kinetic sand from the couch:
 
1. Soak the affected area in white vinegar for an hour.
2. Once the sand particles become loose, scoop them off. 
3. Wash the area with a mild detergent and water. Let it dry overnight.

How do you remove kinetic sand from hair?

You can remove kinetic sand from hair by combing it with a fine-toothed comb with closely packed bristles. Follow with a hair wash.

What’s so special about kinetic sand?

These are the qualities of kinetic sand: 

1. Unlike beach sand, it stays together in shape. 
2. You can mold and create firm shapes with kinetic sand. 
3. It won’t fall apart until an external force is applied.

Leave a Reply

Your email address will not be published. Required fields are marked *

Scroll to Top