Is your Eufy RoboVac struggling to connect to Wi-Fi? Here are the main reasons:
Here’s a simple way to fix it:
Continue reading for 8 common reasons why Eufy RoboVac does not connect to Wi-Fi with their effective solutions.
Eufy RoboVac Won’t Connect to WI-FI: Common Reasons Decoded!

Before we dive into the troubleshooting steps, let’s do some important quick checks:
Now, let’s dive into the troubleshooting:
Reasons | Solutions |
You’re not using a 2.4GHz Wi-Fi network | Make sure your Wi-Fi network is set to the 2.4GHz band. Eufy RoboVacs do not support 5GHz networks. |
Too Many Devices Are Logged In Your Network | Disconnect devices that are not in use or limit the number of simultaneous connections to ensure stable connectivity. |
You’re outside Wi-Fi network/poor internet connection/connection issues | Ensure the RoboVac is within Wi-Fi range and that your internet connection is strong. Address any Wi-Fi signal dead zones. Ensure you input the correct network name and password to avoid errors. |
You are using mobile and Wi-Fi data together. | Disable mobile data on your device when connecting the RoboVac to Wi-Fi. |
You’re not giving location access to the Eufy Clean App. | Enable location access for the app |
You are using a VPN/Adguard. | Temporarily disable VPNs or Adguard during the connection process. |
Eufy is not positioned correctly. | Ensure the RoboVac’s home base is placed in an open area without obstacles. |
Eufy is low on charge/it’s in Reduced Power Standby Mode. | Charge the RoboVac and ensure it’s not in a low-power mode. |
How to Connect Eufy RoboVac to WI-FI?
Here are the 7 specific and 5 general fixes to connect your Eufy RoboVac to Wi-Fi:
Switch To 2.4GHz Network

Remove All Connected Devices Temporarily
Move Near the Wi-Fi Router/Reboot Your Router/Input Wi-Fi Credentials Correctly
Turn Off Cellular Data

Give Location Access To The Eufy Clean App
Disable VPN Temporarily
Charge Eufy/Disable Reduced Power Standby Mode

General Fixes
If all these measures prove unsuccessful, contact Eufy customer support and utilize their 1-year warranty.
Eufy Not Connecting To Wi-Fi FAQs
How do I connect Eufy to 2.4 GHz Wi-Fi?
To connect your Eufy device to a 2.4 GHz Wi-Fi network, ensure your Wi-Fi router is broadcasting on the 2.4 GHz frequency. Eufy RoboVacs aren’t compatible with 5 GHz frequency.
Why is the Wi-Fi light blinking on my Eufy RoboVac?
A blinking Wi-Fi status light on your Eufy RoboVac indicates that the device is ready to connect or actively connecting to your Wi-Fi network. This is part of the initial setup process.
Why does Eufy say no Internet connection?
If your Eufy device reports no Internet connection, it might be due to problems with your Wi-Fi connection capability. Check your router’s settings, ensure the Wi-Fi signal is strong, and verify that your internet connection is operational.
How do I connect my Eufy RoboVac to my hotspot?
To connect your Eufy RoboVac to a hotspot:
1. Open the Eufy Clean App.
2. Navigate to the Wi-Fi settings within the app and select your hotspot’s network.
3. Follow the screen instructions to establish the connection.
How do I change the Wi-Fi on my Eufy vacuum?
Changing the Wi-Fi network on your Eufy is typically done by pressing and holding a specific combination of buttons on the vacuum.
1. Bounce Series: Hold the “power” button for 10 seconds and hear a beep.
2. Dynamic Series: Hold “play/pause” for 10 seconds, and hear the voice prompt.
3. iPath L70 Hybrid: Hold “power” and “charger” for 3 seconds and hear the voice prompt.
4. iPath X8/X8 Hybrid: Hold the “charger” and “square” for 5 seconds and hear the voice prompt.
After the reset, initiate the setup process anew. When prompted, input the details of the new Wi-Fi network.